Tips for Improving Inkjet Printer Efficiency(continued)

Tips for Improving Inkjet Printer Efficiency

Solve the color cast

If the color printed by your inkjet printer is inconsistent with the color displayed on the screen, it means that there is a color cast in the printing. The main reason for this phenomenon is improper software settings, or because the printer driver version is too low, or each user has made some inappropriate settings in the printing software settings. If the reasons mentioned above are excluded, then you should learn to correct the screen display and the actual printing effect. Different printing software has different specific correction methods. The author recommends that when printing is normal, open the printer option of the commonly used software and record the settings at this time; if any fault occurs in the future, you don’t need to bother to analyze the cause. Simply reverting to the previous settings with ease should solve the problem.

Pay attention to dust prevention and regular cleaning

When the inkjet printer is working, the ink in the ink cartridge comes out through the nozzle. After the printer is not used for a long time, the ink around the nozzle will gradually dry and solidify in the air, thus blocking the nozzle, and the ink will not be printed when it is printed later. Out. In order to ensure the normal operation of the printer, the author recommends that you regularly start the automatic cleaning function of the printer and clean the nozzles of the printer to ensure that the ink will not dry up. In addition, pay attention to dust prevention. When not in use for a long time, cover the printer with a dust cover, because dust will also block the ink head.

Do not drag the paper by hand during printing

Since the printing speed of inkjet printers is not very fast, in order to speed up printing, many people often open the front panel and drag the printing paper being printed by hand to speed up the printing speed. This method is extremely wrong. The printing speed is mainly related to the performance of the nozzles, not the speed of the paper. Drag the paper not only can not speed up the printing speed, but also damage the internal paper feeding mechanism, so that the nozzles can not eject ink in the correct position, causing confusion in processing.

Do not take out the ink cartridge when it is not used up

We know that inkjet printers detect the amount of ink in the ink cartridges by inductive sensors. As long as the sensor detects that the ink level of one of the colors is less than the value set inside the printer, it will prompt to replace the ink cartridge. At this time, we can take out the ink cartridge and put it in immediately, and then use the cleaning button in the control panel, or use the tool software that comes with the printer to clean it. Repeat it a few times and most of the printers work normally.

Take out the ink cartridge to reset the internal sensor of the printer, so as to determine the installation of a new ink cartridge, but it should be noted that: do not do it in a shutdown state. When the ink cartridge is not used up, it is best not to remove it casually, so as to avoid unnecessary waste.

Conclusion

For more information about sublimation inkjet printer,sublimation printing with inkjet printer,sublimation with inkjet printer, we are glad to answer for you.