How to Properly Use An Inkjet Printer in a High Temperature Environment

July 28,2022

Do you know? Our inkjet printers are very afraid of heat! In a high temperature environment, the high temperature will accelerate the ink evaporation of the ink cartridge, and it is easy to cause plugging. If you are not careful, the ink cartridge will be scrapped. If the machine is printing for a long time, the high temperature may also cause the failure of the control board and affect the printing performance. For example, when the precision data chip on the motherboard is at a high temperature, the printing speed will be slowed down, and other electronic components and circuits may even be damaged, etc. Today we will share how we should use inkjet printers correctly in high temperature environments?

cheap price inkjet printer,chinese inkjet printer ,digital inkjet printer

How to use an inkjet printer in a high temperature environment?

Store ink cartridges correctly

Unpacked ink cartridges should be stored in a cool environment, if the temperature is too high, the ink will evaporate too quickly

Affect the quality of the ink cartridge. If it is an unpacked ink cartridge, it must be installed in the printer for use. If the ink cartridge is protected and placed outside the printer, it may also accelerate the aging of the ink cartridge.

Maintain your printer regularly

The printer needs regular maintenance, and it needs to be turned on to print for a while at regular intervals. Regular startup printing can prevent the ink from drying up and clogging, and can also reduce the ink used to clean the ink cartridges. To a certain extent, it reduces the printing cost.

Effectively solve paper jams

It is common for inkjet printers to jam, especially some inkjet printers that use friction feeding methods, and cannot use too thin paper to print paper. Here we mainly discuss how to deal with paper jams. In fact, the method is very simple. We only need to put the adjustment lever for adjusting the thickness of the paper to the maximum position, and then gently pull it out. Do not be reckless, because it is easy to damage the printer nozzle.

Prevent the nozzle from drying out

For some clogging caused by the drying of the nozzle, we can first soak a clean cotton cloth and place it next to the print head, because it will naturally evaporate the water, and the nearby air will be saturated with water, so that the ink of the print head will not be So easy to dry up.

Keep the printer powered on

If it is working hours, it is best to keep the printer turned on all the time. Don't turn off the printer after printing a few pages, and then turn it on again after a while. The printer consumes very little power in the standby state, and the power consumption is not too large.

After the printer is turned on, it can automatically maintain the ink cartridges, and the printer ink cartridges have been kept in good condition, which can greatly reduce the chance of the ink cartridges becoming dry and plugging.

Properly follow the procedure to shut down

When you need to turn off the printer, be sure to follow the correct shutdown procedure to turn off the printer, use the power button to turn it off, and wait until the power light goes out before unplugging. In this way, the carriage and the ink cartridge will automatically reset to the protective station position, and the protective cover will cover the ink cartridge nozzle, delaying the ink drying of the nozzle.